[Retracted] MicroRNA­616 promotes the growth and metastasis of non­small cell lung cancer by targeting SOX7.

Following the publication of this paper, it was drawn to the Editor's attention by a concerned reader that the cell formation assay data shown in Figs. 3D, 4D, 8D and 9D were strikingly similar to data that had already appeared in another article written by different authors at different research institutes [Wang Z, Jiang C, Chen W, Zhang G, Luo D, Cao Y Wu J, Ding Y and Liu B: Baicalein induces apoptosis and autophagy via endoplasmic reticulum stress in hepatocellular carcinoma. Biomed Res Int: 732516, 2014]. Owing to the fact that the contentious data in the above article had already been published prior to its submission to Oncology Reports, the Editor has decided that this paper should be retracted from the Journal. The authors were asked for an explanation to account for these concerns, but the Editorial Office did not receive a reply. The Editor apologizes to the readership for any inconvenience caused. [Oncology Reports 38: 2078­2086, 2017; DOI: 10.3892/or.2017.5854].

Broadband electrically controlled reflective metasurface for reconfigurable circularly polarized wavefront manipulation.

A broadband, electrically controlled, reconfigurable, circularly polarized reflective metasurface is presented. The chirality of the metasurface structure is changed by switching active elements, which benefits from the tunable current distributions generated by the elaborately designed structure under x-polarized and y-polarized waves. Notably, the proposed metasurface unit cell maintains a good circular-polarization efficiency in a broadband range of 6.82-9.96 GHz (fractional bandwidth of 37%) with a phase difference of π between the two states. As a demonstration, a reconfigurable circularly polarized metasurface containing 8 × 8 elements was simulated and measured. The results verify that the proposed metasurface can flexibly control circularly polarized waves in a broadband, realizing beam splitting, mirror reflection, and other beam manipulations from 7.4 GHz to 9.9 GHz (fractional bandwidth of 28.9%) by simply adjusting the loaded active elements. The proposed reconfigurable metasurface may offer a promising approach to electromagnetic wave manipulation or communication systems.

Effects of roleplay simulation on improving quality management of nursing service.

OBJECTIVE: To observe the feasibility of roleplay simulation in improving the quality management of nursing services. METHOD: In this retrospective study, 80 nursing staff were enrolled as the study subjects from January 2019 to December 2020. They were divided into a study group (n=40, trained in roleplay simulation) and a control group (n=40, trained in conventional nursing skills) according to different training methods. The self-efficacy and quality of nursing services of the staff in the two groups were assessed retrospectively. Spearman's correlation analysis was conducted to analyze the relationship between the self-efficacy score and nursing service. RESULTS: After training, the self-efficacy scores of the nursing staff in the study group were higher than those in the control group (P<0.05). After training, the nursing staff in the study group had significantly higher service quality scores than those in the control group (P<0.05). Spearman's analysis showed that the self-efficacy scores were positively correlated with the quality of nursing scores (r=0.7091, P<0.0001). After training, the scores of the condition assessment of the nursing staff in the study group was higher than those in the control group (P<0.05). CONCLUSION: Roleplay simulation for nursing staff is helpful to improve the quality of nursing and the ability to deal with emergencies. This can be related to the improvement of self-efficacy in nursing staffs.

Spatial Bessel-like beams along arbitrary convex trajectories based on a 3D-printed metasurface.

A 3D-printed all-dielectric metasurface is presented in this Letter which can generate an accelerating beam with a circularly symmetric non-spreading transverse profile that can propagate along arbitrary convex trajectories. The curved trajectory is mapped to the corresponding direct-space spatial phases by the basic cube units with different geometrical heights. The required phase distribution is derived in detail based on the enveloping theory of differential geometry and the Bessel beam generation method. A metasurface with a preset trajectory is simulated and measured to demonstrate the validity of the phase distribution calculated by the proposed theory. The full-wave simulation and measurement results verify that the Bessel-like beam whose intensity follows a curved (off-axis) trajectory can be produced by the proposed metasurface. The generated hybrid beam merges the advantages of non-accelerating and accelerating diffractive-free beams. Therefore, the proposed metasurface has great potential in ultrahigh-speed communication, secure communication, near-field imaging, wireless energy transmission applications, and so on. The all-dielectric characteristic provides the proposed metasurface with the competitive advantages of low cost and easy large-scale processing.

Optical transparent metasurface for dual-band Wi-Fi shielding.

An optical transparent metasurface for dual-band Wi-Fi shielding is presented in this paper. The unit cell of the proposed metasurface is composed of a hexagonal ring and a three-petal oval flower which resonate at 2.4 and 5.5 GHz, respectively. The corresponding equivalent circuit is modelled to better understand the physical phenomena of electromagnetic shielding. Based on transmission line theory and curve fitting technique, a convenient and efficient method for extracting permittivity of substrate is presented. Simulation results show that the proposed metasurface is insensitive to the polarization of incoming wave under normal incidence and offers excellent angular stability. For verifying the design, two prototypes are fabricated using different manufacturing technologies, flexible printed circuit and ink-jet printing of silver nano-particles. The measured results are in good agreement with the simulated ones. The proposed metasurface has potential applications of electromagnetic wave suppression and information security in indoor environments.

Ultrawideband and high-efficient polarization conversion metasurface based on multi-resonant element and interference theory.

In this work, an ultrawideband and high-efficient polarization conversion metasurface (PCM) is proposed, which can efficiently convert linearly polarized waves into cross-polarized waves in an ultra-wide frequency range. The unit cell of the proposed PCM is composed of two pairs of L-shaped metallic patches covered by a dielectric superstrate and an air-based substrate attached with a metallic ground. The PCM has an operating band from 3.37 to 22.07 GHz with the polarization conversion ratio (PCR) over 90% under the normal incidence, which the ratio bandwidth (fH/fL) is 6.5:1. The PCR can achieve 100% at seven resonant frequencies. The equivalent circuit model is analyzed to explain the fundamental cause of the PCM's multi-resonance and polarization conversion behaviors. In addition, all possible near-field interactions among the resonator, the superstrate, and the ground sheet can be accurately calculated using interference theory, which reveals the underlying physical mechanisms of the multi-resonance metasurface. The theoretical calculated, numerically simulated, and measured results are in good agreement. Compared to other PCMs, the proposed PCM has a simple geometry structure but an ultrawideband and high PCR property.

3D printed metasurface for generating a Bessel beam with arbitrary focusing directions.

In this Letter, a metasurface combined with emerging 3D printing technology is proposed. The proposed metasurface regards the simple cube as the unit cell, and the height of the cube is the only variable. A nearly linear transmission phase range covering 360° operating at 20 GHz is obtained when the height is regulated in [2.26 mm, 11.20 mm]. Therefore, the proposed unit cell can be adopted to any metasurface with various functions. Taking the generation of a non-diffractive Bessel beam as an example, two metasurfaces composed of 30×30 units with different focusing directions are designed based on non-diffractive theory and the generalized law of refraction. Two prototypes are 3D printed and measured by a near-field scanning system. The measured results validate our design with satisfactory focusing and beam deflection performance. Additionally, the 3D printed metasurface has lower cost and a shorter processing cycle, and avoids metal loss. Therefore, a 3D printed metasurface is an excellent candidate that can be applied in millimeter wave or even higher frequency bands.

Independent Manipulating of Orthogonal-Polarization Terahertz Waves Using A Reconfigurable Graphene-Based Metasurface.

Viewing the trend of miniaturization and integration in modern electronic device design, a reconfigurable multi-functional graphene-based metasurface is proposed in this paper. By virtue of the reconfigurability of reflection patterns, this metasurface is able to independently manipulate orthogonal linearly polarized terahertz wave. The building blocks of the proposed metasurface are series of graphene-strips-based unit-cells. Each unit-cell consists of two orthogonal graphene strips and a grounded substrate, which has anisotropic responses for each of orthogonal polarizations (x-polarized and y-polarized waves). The reflection phases of both x- and y-polarized waves can be controlled independently through separate electrical tuning. Based on the proposed metasurface, functionalities including beam splitting, beam deflecting, and linear-to-circular polarization converting using a shared aperture are numerically demonstrated and analyzed. Simulation results demonstrate excellent performance, which is consistent with the theorized expectations. This work paves the way for enhancing the miniaturization of modern electronic/optical devices and potentially has important applications in the next-generation information systems for communication, sensing, and imaging.

MicroRNA-616 promotes the growth and metastasis of non-small cell lung cancer by targeting SOX7.

MicroRNAs (miRNAs) are a group of important regulators in human types of cancer including non-small cell lung cancer (NSCLC). miR-616 has been found to be a novel cancer-related miRNA. However, the expression and biological function of miR-616 in NSCLC have not been investigated. In this study, qRT-PCR was performed to evaluate the level of miR-616 in NSCLC tissues. MTT, BrdU and Transwell assay were used to investigate the proliferation and metastasis ability of NSCLC cells. Subcutaneous injection model and tail vein injection model were used to evaluate the effect of miR-616 on the in vivo growth and metastasis of NSCLC cells. It was also found that the expression level of miR-616 was increased in NSCLC tissues and cell lines. Patients with a high level of miR-616 had a significantly shorter overall survival and disease-free survival. Functionally, miR-616 overexpression promoted while miR-616 knockdown inhibited the proliferation, migration and invasion of NSCLC cells. Moreover, miR-616 overexpression enhanced the subcutaneous growth and lung metastasis of NSCLC cells in nude mice. Mechanistically, SOX7 was confirmed to be the downstream target of miR-616 in NSCLC cells. Forced expression of SOX7 prevented the promoting effects of miR-616 overexpression on the proliferation and metastasis of NSCLC cells, while knockdown of SOX7 reversed the inhibitory effects of miR-616 knockdown on the proliferation and metastasis of NSCLC cells. In conclusion, the present study indicates that miR-616 is a promising biomarker and therapeutic target in NSCLC.

A Generalized Lossy Transmission-Line Model for Tunable Graphene-Based Transmission Lines with Attenuation Phenomenon.

To investigate the frequency shift phenomenon by inserting graphene, a generalized lossy transmission-line model and the related electrical parameter-extraction theory are proposed in this paper. Three kinds of graphene-based transmission lines with attenuation phenomenon including microstrip line, double-side parallel strip line, and uniplanar coplanar waveguide are analyzed under the common conditions where different chemical potentials are loaded on graphene. The values of attenuation constant and phase constant, and the real and imaginary parts of the characteristic impedance of transmission lines are extracted to analyze in details. When the attenuation constant and the reactance part of the characteristic impedance are approximately equal to zero, this kind of transmission line has low or zero insertion loss. On the contrary, the transmission line is under the radiation mode with obvious insertion loss. The phase constant changes linearly under the transmission mode and can be varied with changing of chemical potentials which attributes to the property of frequency tunability. Furthermore, a bandwidth reconfigurable uniplanar coplanar waveguide power divider is simulated to demonstrate that this theory can be applied to the design of three-port devices. In summary, this work provides a strong potential approach and design theory to help design other kinds of terahertz and mid-infrared reconfigurable devices.

Ischemia postconditioning preventing lung ischemia-reperfusion injury.

OBJECTIVE: This study evaluates the inhibitory effect of IPO against ischemia reperfusion (I/R) induced lung injury in rats. METHODS: Anesthetized and mechanically ventilated adult Sprague-Dawley rats were randomly assigned to one of the following groups (n=12 each): the sham operated control group, the ischemia-reperfusion (IR) group (30min of left-lung ischemia and 24h of reperfusion), the IPO group (three successive cycles of 30-s reperfusion per 30-s occlusion before restoring full perfusion), and the dexamethasone plus IPO group (rats were injected with dexamethasone (3mg/kg·day(-1)) 10min prior to the experiment and the rest of the procedures were the same as the IPO group). Lung injury was assessed by wet-to-dry lung weight ratio and tissue apoptosis and biochemical changes. RESULTS: Lung ischemia-reperfusion increased lung MDA production, serum proinflammatory cytokine count, and MPO activity and reduced antioxidant enzyme activities (all p<0.05 I/R versus sham), accompanied with a compensatory increase in caspase-3, bax, Fas, FasL proteins and a decrease in Bcl-2 protein. Plasma levels of TNF-α, IL-6, and IL-1ß were increased in the I/R group (all p<0.05 versus sham). IPO attenuated or prevented all the above changes. Treatment with dexamethasone enhanced all the protective effects of postconditioning. CONCLUSION: Postconditioning obviously inhibits I/R induced lung injury by its antioxidant, anti-inflammatory and anti-apoptosis activities.